Using Data Transferred To/From A Computer - Brother P-touch PT-9600 Guía De Usuario

Ch. 4 Advanced Functions
NOTE
☞
To stop the operation from being performed,
press o.
☞
To erase the operation assigned to a PF key,
start up P-touch Transfer Manager, which was
installed with P-touch Editor and then erase the
macro. Refer to page 58.
☞
While an operation assigned to a PF key is
being performed, the operation can be over-
written by pressing the keys of the new opera-
tion.
50
Using data transferred
to/from a computer
● ● ● ● ● ● ● ● ● ● ●
Transfer mode
With the Transfer mode, a template or a user-defined
character image (character not available on the
PT-9600) can be transferred from the computer and
assigned to a PF key on the PT-9600 or label data on
the PT-9600 can be backed up to a computer. A tem-
plate created with the P-touch Editor software on the
computer can be downloaded to the PT-9600, where
it can be edited and printed. In addition, if text data
stored on the PT-9600 is backed up to a computer,
that data can be restored on the PT-9600 in case the
data is erased from the P-touch's memory.
NOTE
☞
Data transfer between the computer and
PT-9600 is through the USB connection.
☞
One CSV database can be saved if one is not
already transferred to a PF key.
☞
Since data saved with and transferred from P-
touch Editor may appear slightly different (font,
detailed layout, etc.) than if it was printed from
P-touch Editor, try printing a test label first.
To enter Transfer mode:
1 Hold down d and press (.
NOTE
To return to the text without entering Transfer
mode, press e.
1 2 3 4 5 6 7 8 9 A B C D E F K Q Q Q Q Q
R
R
G
TRANSFER MODE?
R
N O
H
R
L M
R
I
R
J
AUTO 1.10
Length Margin
● ● ● ● ● ● ● ● ● ● ●
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size