SMA INVERTER MANAGER Instrucciones De Instalación página 17

SMA Solar Technology AG / SMA Solar Technology America LLC
9. The LCS-Tool prompts for a confirmation of the selected
country and grid code (see figure 13). A wrong
configuration can be changed by clicking the [Back]
button and by changing the settings in the previous
window.
Figure 13: LCS-Tool - checking the country and grid code
10. The system then applies the grid code selected on the
Inverter Manager to the detected inverters. Any
inverter added at a later stage automatically inherits
the same grid code. The application of only one grid
code is possible per Inverter Manager.
INFORMATION
It is essential to choose the correct grid code.
A modification after the first ten operating hours have
passed is only possible with a personal SMA Grid
Guard code.
The grid code parameters can be changed
subsequently with the LCS-Tool (see
section 5.2.6, page 26). Prerequisite is the use of the
latest version of the LCS-Tool.
11. A green square identifies the commissioned inverters.
The inverters are only connected to the utility grid when
the [Start] command has been carried out from the bar
below the start menu (see figure 14).
Installation Manual
5 LCS-Tool
IMVIOBOX-IA-xx-14 17