Changing The Grid Code - SMA INVERTER MANAGER Instrucciones De Instalación

5 LCS-Tool

5.2.2 Changing the Grid Code

Figure 17: LCS-Tool - entering the SMA Grid Guard code
To reset the Inverter Manager after the first ten operating
hours and to select a new country data set, use your SMA
Grid Guard code under the user group Installer (see
certificate "Order form for the SMA Grid Guard code" at
www.SMA-Solar.com).
Procedure:
1. Open the LCS-Tool.
2. Log in as an Installer.
3. Call up the menu Service.
4. Enter your SMA Grid Guard code in the field
Individual access code under Grid Guard.
5. Select [Save] to save the changes.
☑ A new menu item General is available under the
menu Setup.
20 IMVIOBOX-IA-xx-14
SMA Solar Technology AG / SMA Solar Technology America LLC
Installation Manual