Changing Of Inverter Parameters - SMA INVERTER MANAGER Instrucciones De Instalación

5 LCS-Tool
5.2.6 Changing of Inverter
Parameters
Figure 24: LCS-Tool - changing of inverter parameters
All inverter parameter are Grid Guard protected and
require the Grid Guard code for changes. To change the
inverter settings, use your SMA Grid Guard code under the
user group Installer (see section 5.2.2, page 20).
Procedure:
1. Open the LCS-Tool.
2. Log in as an Installer.
3. Call up the menu Setup.
4. Enter the respective values under Inverter
Parameter.
5. Select [Save] to save the changes.
Deactivating/Activating the inverter
parameters
To activate and deactivate a parameter, double-click on the
parameter using the left mouse button.
When the parameters are activated, the input fields and
buttons are enabled. Inactive parameters are marked with
disable.
26 IMVIOBOX-IA-xx-14
SMA Solar Technology AG / SMA Solar Technology America LLC
Installation Manual