Black Diamond JetForce UL Instrucciones De Uso página 8

(Figure 9) and is free of damage.
5. Inspect the backpack for punctures or tears.
6. Inspect the backpack shoulder straps, leg strap, and waist belt webbing for
tears or damaged stitching.
7. Inspect the buckles for signs of damage and confirm proper function.
If the inspection reveals signs of damage or if you have any doubts about the
dependability of your JetForce UL Backpack, retire and destroy it or contact
your pack manufacturer's customer service center. Damaged gear must be
repaired before use or retired and destroyed to prevent future use.
Disposal
Dispose of the product in domestic waste per local regulations. Do not mechani-
cally disrupt or incinerate the product, this may lead to potential hazards.
SPECIFICATIONS
• Allowable operating temperature: -30°C to 50°C (-22°F to 122°F)
• Optimal storage temperature: 0°C to 23°C (32°F to 73°F)
MARKINGS (WHEN PRESENT)
Black Diamond: Black Diamond brand name and name of the manufacturer.
: Black Diamond's logo.
JetForce UL 26: Example of a model name.
Alpride 2.0: Technology/system name.
: The CE mark of conformity and indicates fulfillment of the requirements of
the Personal Protective Equipment Regulation (EU) 2016/425.
Notified body performing the EU type examination: TÜV SÜD Product
Service GmbH, Daimlerstraße 11, D-85748 Garching, Germany, NB No 0123.
YYYY-MM: Year and Month of Manufacture.
XXXXXXXXXXXX: 12-digit serial number unique to each airbag system.
: Instruction pictogram advising users to read the instructions and warnings.
EN 16716:2017: The JetForce UL Backpack conforms to EN 16716:2017,
Mountaineering equipment - Avalanche airbag systems - Safety requirements
and test methods.
The Declaration of Conformity for this product may be viewed at
http:blackdiamondequipment.com/DOC
Black Diamond is an ISO 9001 certified company.
LIMITED WARRANTY
For 3 years following purchase unless otherwise indicated by law, we will war-
rant to the original retail buyer only that our products are free from defects in
material and workmanship as originally sold. If you receive a defective product,
return it to us, and we will replace it subject to the following conditions: We do
not warrant products which show normal wear and tear or that have been used
or maintained improperly, modified or altered, or damaged in any manner.
6