OHAUS Adventurer SL Serie Manual De Instrucciones página 22

EN-18 Adventurer SL
3.5.1.2 Linearity Calibration (Cont.)
CAL is displayed. Press Yes to enter the
Calibration Sub-menu.
When SPAN displays, press No to display
LINEAR, the next Menu Item.
Press Yes to initiate Linearity Calibration.
The display flashes while the zero reading is
taken.
The display flashes the midpoint weight value
for Linearity Calibration, according to the specific
model.
Put the specified weight on the pan and press
Yes to calibrate.
The display flashes BUSY.
The display flashes the capacity weight value,
according to the specific model. Put the specified
weight on the pan and press Yes to calibrate.
The display flashes BUSY.
When calibration is complete, DONE is displayed.
Remove the weight from the pan. The balance
returns to the currently- selected application
mode.