Pari LC SPRINT SINUS Instrucciones De Uso página 51

• Insert the nebuliser in the holder on the compressor in-
tended for this purpose.
• Open the nebuliser lid by pressing your thumb against the
underside of the lid.
• Pour the required quantity of
inhalation solution into the top
of the nebuliser.
Note the minimum and max-
imum fill volumes [see: Gen-
eral nebuliser data, page 25].
If the nebuliser contains too
little or too much liquid, the
nebulisation and consequently
the therapy will be less effect-
ive.
• Close the nebuliser lid.
Make sure that the lid snaps into place.
If several inhalation solutions are to be used one after the
other:
• Rinse the nebuliser out with drinking water between the indi-
vidual applications.
• Shake excess water out of the nebuliser.
• Fill the nebuliser with the next inhalation solution as
described.
Connecting the tubes
The PARI SINUS tubing system consists of two identical tubes.
One tube is needed for the compressed air supply, the other
helps to generate the vibration.
To connect the tubing system up fully, proceed as follows:
– 15 –