REPLACING THE WHEELS
(Fig. 33a, 33b & 33c)
WARNING:
the battery pack when servicing or
transporting the mower.
1. Turn the mower on its side with the
upper surface against a wall.
2. Use a flat blade screwdriver to pry
the dust cover away from the wheel.
3. Use an adjustable or 1/2 inch
(13mm) wrench to turn the bolt
counterclockwise to loosen it.
4. Remove the bolt, the worn wheel
and the wave washer from the
wheel axle.
42
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC
Always remove
33a
Front wheel for both LM2100SP/
LM2100SP-FC/LM2100/LM2100-FC
33b
Rear wheel for LM2100SP/LM2100SP-FC
Dust Cover
Bolt
Round Recess
facing outside
Front Wheel
Wave Washer
Wheel Axle
Dust Cover
Bolt
Round Recess
facing outside
Front Wheel
Gear
Screw
Wave Washer
Wheel Axle