EGO POWER+ LM2100SP Manual Del Operador página 45

5. Repeat steps 1 to 3 above the
remove the other rear wheel
and wheel cover (LM2100SP/
LM2100SP-FC only).
6. Loosen the locking screw for
the trailing shield on both sides;
remove the worn trailing shield
(Fig. 35a & 35b).
7. Replace with a new trailing shield
and attach it with the two locking
screws and flat washers.
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC
35a
Locking Screw For
Trailing Shield
Trailing shield
For LM2100SP/LM2100SP-FC
35b
Locking Screw For
Trailing Shield
Trailing shield
For LM2100/LM2100-FC
45