EGO POWER+ LM2100SP Manual Del Operador página 50

Problem
Mower is
difficult to pull
back when the
self propel is
turned off.
The motor
works but the
blade doesn't
cut the grass.
Short running
time of the
mower with
included
battery
50
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC
Cause
◾
The wheels are temporarily
locked.
◾
The blade is not tightened to
the required torque.
◾
Grass conditions and
cutting height setting will
greatly affect the battery
run time. The claimed run
time is based on a light load
condition.
Solution
◾
Simply push ahead slightly
and then move the mower
as desired.
◾
Re-tighten the blade. The
recommended torque for
the blade bolt is 36-43 ft-lb
(49-59Nm)
◾
Raise the blade height and
slow your pace to reduce the
cutting load