EGO POWER+ LM2100SP Manual Del Operador página 44

REPLACING THE TRAILING SHIELD
WARNING:
mower.
WARNING:
working. Never operate the mower with damaged safety devices. Failure to do so can
result in personal injury. The trailing shield is subject to wear and damage, which could
expose moving parts or allow objects to be thrown. For safety protection, frequently
check the trailing shield and replace it immediately with only the identical replacement
part, listed in this manual.
1. Remove the battery.
2. Turn the mower on its side with
the upper surface against a wall.
3. Remove the rear wheel on the
top side, following the section
"REPLACING THE WHEELS" in this
manual.
4. For self propel mower LM2100SP/
LM2100SP-FC, loosen the wheel
cover locking screw and remove
the screw, spring washer and flat
washer in that order, then remove the wheel cover from the wheel shaft (Fig. 34).
44
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC
Always remove the battery pack when servicing or transporting the
Never operate the mower unless the trailing shield is in place and
34
Wheel Cover
Locking Screw
Wheel Axle