Safety Instructions - SOPRO COMEG 284 Manual De Utilización

Read the user manual.
• Comply with the conditions of use and storage conditions.
• The device may only be opened by a qualified technician authorised by the manufacturer.
• Do not insert any metal object into the device, in order to avoid any risk of electric shock, fire, short-
circuit or hazardous discharge.
• Do not expose the device to an excessively humid environment or where it could be sprayed with water.
• Only use the accessories supplied with the device or optional accessories recommended by the
manufacturer.
• Do not place any heavy objects on the device.
• This device is not sterile.
• If the power cord is damaged, immediately switch off the device. It is dangerous to operate this device
with a damaged cord.
• To disconnect the cord, pull out the plug. Never pull on the cord itself.
• Disconnect the device from the mains if you do not expect to use it for a few days or longer.
• Ensure there is sufficient air circulating to prevent overheating inside the device: at least 15 cm all
around the device. Do not cover the device and make sure the feet of the device are present.
• Do not use corrosive or abrasive products to clean the device, but only use the disinfectant liquids
recommended in section 8.
• Before using the device, make sure it does not have any rough surface, sharp edges or protuberances
that might cause safety problems.
• The surface temperature can reach 41°C (after a few minutes' use). Therefore avoid keeping this area
in contact with the patient.
011563 C - 11/2013
E N G L I S H
1 3

SAFETY INSTRUCTIONS

5