Installation Checklist - DBI SALA LAD-SAF Instrucciones Para El Usuario

INSTALLATION CHECKLIST

SERIAL NUMBER(S):
MODEL NUMBER(S):
DATE PURCHASED:
Install Date:
Approved By:
Corrective Action/Maintenance:
Install Date:
Approved By:
Corrective Action/Maintenance:
Install Date:
Approved By:
Corrective Action/Maintenance:
Install Date:
Approved By:
Corrective Action/Maintenance:
DATE OF FIRST USE:
Ensure all fasteners are in place and properly tightened.
Ensure the Carrier Cable is properly tensioned.
Ensure the Carrier Cable does not abrade against the structure at any point.
Ensure system information is recorded on the system label and Inspection and
Maintenance Log: Components of the LAD-SAF system include an i-Safe™ Radio Frequency
(RFID) tag. The RFID tag can be used in conjunction with the i-Safe handheld reading device
and web based portal (http://isafe.capitalsafety.com).to simplify inspection and inventory
control and maintain electronic records for your fall protection equipment.
Ensure all fasteners are in place and properly tightened.
Ensure the Carrier Cable is properly tensioned.
Ensure the Carrier Cable does not abrade against the structure at any point.
Ensure system information is recorded on the system label and Inspection and
Maintenance Log: Components of the LAD-SAF system include an i-Safe™ Radio Frequency
(RFID) tag. The RFID tag can be used in conjunction with the i-Safe handheld reading device
and web based portal (http://isafe.capitalsafety.com).to simplify inspection and inventory
control and maintain electronic records for your fall protection equipment.
Ensure all fasteners are in place and properly tightened.
Ensure the Carrier Cable is properly tensioned.
Ensure the Carrier Cable does not abrade against the structure at any point.
Ensure system information is recorded on the system label and Inspection and
Maintenance Log: Components of the LAD-SAF system include an i-Safe™ Radio Frequency
(RFID) tag. The RFID tag can be used in conjunction with the i-Safe handheld reading device
and web based portal (http://isafe.capitalsafety.com).to simplify inspection and inventory
control and maintain electronic records for your fall protection equipment.
Ensure all fasteners are in place and properly tightened.
Ensure the Carrier Cable is properly tensioned.
Ensure the Carrier Cable does not abrade against the structure at any point.
Ensure system information is recorded on the system label and Inspection and
Maintenance Log: Components of the LAD-SAF system include an i-Safe™ Radio Frequency
(RFID) tag. The RFID tag can be used in conjunction with the i-Safe handheld reading device
and web based portal (http://isafe.capitalsafety.com).to simplify inspection and inventory
control and maintain electronic records for your fall protection equipment.
15