INSPECTION AND MAINTENANCE LOG
SERIAL NUMBER(S):
MODEL NUMBER(S):
DATE PURCHASED:
Date:
Approved By:
Corrective Action/Maintenance:
Date:
Approved By:
Corrective Action/Maintenance:
Date:
Approved By:
Corrective Action/Maintenance:
Date:
Approved By:
Corrective Action/Maintenance:
DATE OF FIRST USE:
Inspect Top and Bottom Brackets: Inspect for damage, corrosion, or rust. Look for cracks,
bends, or wear that could affect strength and operation. Inspect for missing fasteners;
retighten or replace as necessary.
Inspect Cable Guides: Ensure cable guide is not warn or bent and still locks onto the cable.
Inspect for loose or missing fasteners; retighten or replace as necessary.
Inspect Carrier Cable: Look for worn or broken strands. Inspect for signs of abrasion against
ladder or structure. Cable must not contact ladder or structure. Replace damaged cable as
necessary. Check the carrier cable tension, ensuring there is no slack. Re-tension the cable as
necessary.
Inspect Ladder Structure: Inspect ladder structure for damage, rust, or deterioration that
could affect strength of the ladder.
Inspect Labels: All labels (see Section 8) should be securely attached and fully legible. Record
inspection dates on the system label.
Inspect Top and Bottom Brackets: Inspect for damage, corrosion, or rust. Look for cracks,
bends, or wear that could affect strength and operation. Inspect for missing fasteners;
retighten or replace as necessary.
Inspect Cable Guides: Ensure cable guide is not warn or bent and still locks onto the cable.
Inspect for loose or missing fasteners; retighten or replace as necessary.
Inspect Carrier Cable: Look for worn or broken strands. Inspect for signs of abrasion against
ladder or structure. Cable must not contact ladder or structure. Replace damaged cable as
necessary. Check the carrier cable tension, ensuring there is no slack. Re-tension the cable as
necessary.
Inspect Ladder Structure: Inspect ladder structure for damage, rust, or deterioration that
could affect strength of the ladder.
Inspect Labels: All labels (see Section 8) should be securely attached and fully legible. Record
inspection dates on the system label.
Inspect Top and Bottom Brackets: Inspect for damage, corrosion, or rust. Look for cracks,
bends, or wear that could affect strength and operation. Inspect for missing fasteners;
retighten or replace as necessary.
Inspect Cable Guides: Ensure cable guide is not warn or bent and still locks onto the cable.
Inspect for loose or missing fasteners; retighten or replace as necessary.
Inspect Carrier Cable: Look for worn or broken strands. Inspect for signs of abrasion against
ladder or structure. Cable must not contact ladder or structure. Replace damaged cable as
necessary. Check the carrier cable tension, ensuring there is no slack. Re-tension the cable as
necessary.
Inspect Ladder Structure: Inspect ladder structure for damage, rust, or deterioration that
could affect strength of the ladder.
Inspect Labels: All labels (see Section 8) should be securely attached and fully legible. Record
inspection dates on the system label.
Inspect Top and Bottom Brackets: Inspect for damage, corrosion, or rust. Look for cracks,
bends, or wear that could affect strength and operation. Inspect for missing fasteners;
retighten or replace as necessary.
Inspect Cable Guides: Ensure cable guide is not warn or bent and still locks onto the cable.
Inspect for loose or missing fasteners; retighten or replace as necessary.
Inspect Carrier Cable: Look for worn or broken strands. Inspect for signs of abrasion against
ladder or structure. Cable must not contact ladder or structure. Replace damaged cable as
necessary. Check the carrier cable tension, ensuring there is no slack. Re-tension the cable as
necessary.
Inspect Ladder Structure: Inspect ladder structure for damage, rust, or deterioration that
could affect strength of the ladder.
Inspect Labels: All labels (see Section 8) should be securely attached and fully legible. Record
inspection dates on the system label.
18