Operation - Dimplex DF2426GB Manual Del Propietário

Fireplace Installation
WHITE WIRE - N
BLACK WIRE – L
GREEN WIRE - G
a wire clamp (not supplied)
(Figure 3).
6. Connect the black wire (live)
from the unit to the black wire
from power supply (Figure 3).
7. Connect the white wire
(neutral) from the unit to the
white wire from power supply
(Figure 3).

Operation

A. 3-Position Switch
The switch has two on positions
marked. The "--" position is for
manual operation. In this position
the built-in remote control is
by-passed. The "=" position is
for operating the unit with the
provided remote control. When
in remote control ("=") position
the unit is operated with the ON
and OFF buttons of the remote
control.
10
WHITE WIRE - N
BLACK WIRE – L
GROUND WIRE - G
8. Connect the green wire
(ground) from the unit to the
green wire from power supply
(Figure 3).
9. Place all connectors inside
the unit and secure the
junction box cover to unit.
Ensure that the cable clamp
grips only the jacket of
service cable.
When the switch is in the center
"o" position the unit is off.
B. Heater ON/OFF Switch
The Heater on/oFF switch
supplies power to the heater fan
and the heater element. When the
switch is in the on position the
heater operates if the thermostat
calls for heat.
C. Heater Thermostat Control
To adjust the temperature to your
120 V
POWER
SUPPLY
(BREAKER
PANEL)
www.dimplex.com