Connecting The Battery - EMAK EF63C/6,5M Manual Del Operador

UNPACKING AND ASSEMBLY
3.3 FITTING THE SEAT
1. Fit the seat (1) onto the plate (2) using the
screws (3).
3.4 FITTING THE BLADE ENGAGEMENT
LEVER
1. Using the bush (1), fit the end of the lever
(2) onto the protruding part of the pin (3);
2. fasten this securely with the screws (4) and
the nuts (5).

3.5 CONNECTING THE BATTERY (

The battery (1) is situated under the seat.
1. Connect the battery connector (2) to the
machine connector (3);
2. recharge the battery by following the
instructions in the manual (☛ 6.2.5).
IMPORTANT
until the battery is fully charged!
WARNING!
!
ding safe handling and disposal.
➤
Never start the engine
Follow the battery manufacturer's instructions regar-
3
3
2
4
1
4
sonly in the electric start models):
EN 9
2
5
3
1
2 3
1