Checks And Adjustments - EMAK EF63C/6,5M Manual Del Operador

EN 30
The machine has a connector (1) for recharging located next to the battery,
which is to be connected to the corresponding connector of the special "CB02"
maintenance battery charger supplied.
IMPORTANT
only be used for connecting to the
"CB02" maintenance battery charger.
For its use:
– follow the instructions given in the rela-
tive instructions manual;
– follow the instructions given in the bat-
tery manual.

6.3 CHECKS AND ADJUSTMENTS

6.3.1 D
ISMANTLING
A badly sharpened blade tears at the grass, reduces collection and makes the
lawn turn yellow. To dismantle the blade, hold onto it tightly using work gloves and
loosen the two screws (1).
Sharpen the two cutting edges using a
medium grade grinding wheel and check the
balance by holding the blade up with a round
18 mm Ø bar inserted in the central hole.
WARNING!
!
damaged or bent blade; never try to
repair it! ALWAYS USE MANUFAC-
TURER'S GENUINE REPLACEMENT
BLADES BEARING THE SYMBOL
WARNING!
!
screw down the fixing bolts (1). If
necessary, replace the nuts and bolts
only with GENUINE SPARE PARTS.
This connector must
,
SHARPENING AND BALANCING THE BLADE
Always replace the
When assembling,
1
1
!
MAINTENANCE
Ø 18 mm