Medion MD 86435 Manual De Instrucciones página 235

The picture is not clear.
The picture is blurred or
out of focus.
The flash did not go off.
The computer cannot find
the camera.
The SD card or internal memory
is full.
The SD card has the wrong
format.
The lens is dirty.
You did not hold the camera still
while taking the photo.
The subject of the photo was too
close to the lens.
The flash is switched off.
The camera is switched off.
21. Troubleshooting
Insert a new card into the
camera.
Download the pictures onto
the computer and then delete
them from the card or
memory.
Ask the manufacturer of the
SD card for advice.
Clean the lens.
When you next take a photo,
keep your hands steady and
wait for approximately two
seconds after taking the
photo before moving the
camera.
Keep a distance of at least
1.5m between the lens and
the subject.
Switch the flash to a mode
other than OFF.
Switch the camera on.
73