Steren TEL-2492 Manual De Instrucciones página 50

v
• I get noise, static, or weak signal even when
I'm near the telephone base.
• My handset doesn´t ring when I recieve a
call
• My caller ID isn´t working
• You can improve the performance of your
cordless phone and router by:
a) Positioning your new phone as far away
as possible from any other existing cordless
telephone system.
b) Positioning your telephone base as far as
possible from your router, computer or other
devices.
• Install your phone as far away from
these electronic devices as possible: wireless
routers, radios, radio towers, pager towers,
cell phones, intercoms, room monitors,
televisions, personal computers, kitchen
appliances and other cordless phones.
• The ringer must be activated. Refer to the
section(s) on ringer selection in this user's
manual.
• Make sure the telephone line cord is
plugged fi rmly into the telephone base and
jack.
• Place the cordless phone near the base.
• Charge the battery in the wireless handset.
• Unplug other phone extensions you might
have.
• Move the telephone base to another
location, preferably on an upper fl oor.
• Contact your local telephone company.
• You must subscribe to this service for this
feature to work on your phone.
23