Installation Of The Base And Handset - Steren TEL-2492 Manual De Instrucciones

INSTALLATION OF THE BASE AND HANDSET

1. Remove the battery compartment cover.
2. Place two rechargeable AAA batteries (included), pay attention to polarity.
3. Replace the battery compartment cover.
4. Choose a location for your cordless telephone as far away as possible from
any other cordless (wireless) devices such as cordless telephones, 802.11
wireless routers (i.e., Wi Fi), microwave ovens, televisions, computers, etc.
5. Connect the adapter to the connector DC 6V on the back of the base and the
other end to adapter into an outlet.
6. Connect the phone line cord to the connector represented as LINE (except the
extension).
LINE
DC 6V
7. Place the handset on the base.
8. Verify that the phone has a dial tone.
5