Prepare The Hood - Broan Elite Chimney Island Manual De Instrucciones

PREPARE THE HOOD

Unpack hood and check contents. You should receive:
1 - Hood Assembly
1 - Glass Canopy
1 - Decorative Flue Assembly
(consisting of 2-upper and 2-lower flue sections)
1 - Hood Frame Assembly
(consisting of upper and lower sections)
2 - Upper Flue Trim Strips
2 - Lower Flue Trim Strips
1 - Aluminum Grease Filter (installed on hood)
4 - 35W MR16 GU10 Halogen Lamps (included on hood)
1 - Parts Bag containing:
6 - Mounting Screws (4mm x 38mm Cross Recessed Pan Head)
3 - Mounting Screws (4mm x 12mm Cross Recessed Pan Head)
12 - Mounting Screws (3mm x 5mm Cross Recessed Pan Head)
4 - Mounting Screws (.188" x .250" Cross Recessed Flat Head)
1 - Suction Cup Tool
3 - Wire Nuts
1 - Installation Manual
3 WIRE NUTS
12 MOUNTING SCREWS
(3mm x 5mm Cross
Recessed Pan Head)
HOOD
FRAME ASSEMBLY
GLASS
CANOPY
HOOD
ASSEMBLY
MODEL EI5936SS
Page 3
3 MOUNTING
SCREWS
(4mm x 12mm
Cross Recessed
Pan Head)
BULB SUCTION
CUP TOOL
4 MOUNTING
SCREWS
(.188" x .250"
6 MOUNTING
Cross Recessed
SCREWS
Flat Head)
(4mm x 50mm
Cross Recessed
Pan Head)
FLUE
TRIM
STRIPS
DECORATIVE
FLUE
ASSEMBLY
DECORATIVE
FLUE
ASSEMBLY