General Operation; Sound Setting; Auxiliary Input - NORAUTO SOUND NS-211 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 93

GENERAL OPERATION

Power On/Off Button
Press the [SRC /
] button to turn the unit on
when the vehicle ignition switch is on. Press
and hold the button to turn the unit off.
Adjust Volume level
Rotate the knob to adjust volume level. Rotate
it clockwise to increase and anticlockwise to
decrease the volume.
Audio Mute
Press the [
] button to mute the volume
from the system. "MUTE" will appear on the
display panel and the volume will be muted.
Press the [
] button again, or rotate or
press the VOL/MENU control to return the
volume level to the setting in use before the
Mute function was activated.
Mode Button (SRC)
Press the [SRC /
between Radio, DISC (when disc is in), USB
(when USB is connected), Card(when SD/
MMC card is in) AUX play.

Auxiliary Input

To access an auxiliary device:
1. Connect the portable audio player to the
AUX interface on the front panel.
2. Press the [SRC /
mode.
Press SRC again to cancel Aux-In mode and
go to the next mode.
Display Selector (DISP)
This unit can display either the clock time
or radio frequency/CD player functions.
O r d i n a r i l y , t h e r a d i o f r e q u e n c y o r C D
player track indication is displayed, but the
unit will display the time when the DISP
button is pressed. The time will display for
approximately 5 seconds then return to the
radio or CD player function display.
] button to change
] button to select Aux-In

SOUND SETTING

Press the [ EQ ] button to enter sound effect
setting mode. First press shows current EQ.
Rotate the knob to changes BEAT EQ in this
order:
OFF -> POP -> CLASSIC -> ROCK -> JAZZ
-> CUSTOM
Rotate the knob to changes CUSTOM, and
press the knob, the press [
to select it including: BAS-G -> TRE-G, rotate
the knob to select a value.
BAS-G / TRE-G: (-7)- (+7)
Press the [ EQ ] button, then press [
] button to select USER preset including:
BALANCE -> FADER -> LOUD, rotate the
knob to select a value.
BALANCE:LEFT 1-7->CENTER->RIGHT 1-7
FADER:FRONT 1-7->CENTER->REAR 1-7
LOUD: ON/OFF
50
] or [
] button
] or [

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

758294

Tabla de contenido