Z-Wave Functions; About Z-Wave; Enrolling On A Z-Wave Network - Schlage BE468 Serie Guia Del Usuario

Z-WAVe FuNCtIoNS

About Z-Wave

This lock is a Security Enabled Z-Wave Product.
• This lock may be included into Z-Wave networks from various manufacturers.
• Listening nodes from any manufacturer can act as repeaters to extend network range.
• The lock will have limited functionality if included with a non-secure controller.
• Configuration parameters and association group information can be found at answers.schlage.com.

enrolling on a Z-Wave Network

This lock may be included into any Z-Wave network, from any manufacturer. Refer to your home automation system's documentation for
more information.
enroll your Lock:
The Inclusion/Exclusion process for Z-Wave controllers depends on the controller that each manufacturer uses. Consult the security/home
automation documentation from your security company to learn how to add your lock to the Z-Wave network.
Extend the bolt on the lock and then perform the following:
eNRoLL/uNeNRoLL tHe LoCk
Press
Enter
6 Digit
Programming Code
to verify enrollment:
1. Remove the battery cover. See Replacing the Batteries on page 4.
2. Disconnect the battery connector.
3. Observe the LED in the center of the printed circuit board while reconnecting the battery connector.
4. The LED will blink if the lock is included.
10
Press
The lock was
pRoGRAmmING UsING z-WAve
Many home automation support features of the deadbolt including locking, unlocking,
and various other programming options.
Refer to your home automation system documentation for more information.
OR
The lock was
included/ not included/
excluded excluded