Assembly; Unpack Electric Pressure Washer; Prior To Operation - Briggs & Stratton PW101-2010 Manual Del Operador

Assembly

Read entire operator's manual before you attempt to
assemble or operate your new electric pressure
washer.
Your electric pressure washer requires some assembly but
is quickly ready for use. If you have any problems with the
assembly of your electric pressure washer, please call the
electric pressure washer helpline at (800) 743-4115. If calling for
assistance, please have the model, revision, and serial number
from the identification label available.
Tools Needed
• Phillips screw driver, #2
• Needle nose pliers
Items Not Included
• Garden hose

Unpack Electric Pressure Washer

1. Remove everything from carton.
2. Ensure you have all included items prior to assembly.
Items Included in the Carton
• Main unit
• Handle
• Accessory tray
• Wheels (2)
• Detergent bottle
• Stability Foot
• Screws (6)
• Spray gun
• High pressure hose
• Turbo wand
• Metal wand (1) and tips (3)
• Parts bag (which includes the following):
• O-rings, spare: 2 for spray gun; 2 large and 2 small for
high pressure hose
• Operator's manual
• Owner's registration card
Check all contents. If any parts are missing or damaged, call the
electric pressure washer helpline at (800) 743-4115.
Become familiar with each component before assembling the
electric pressure washer. Identify contents with the illustration
shown in Features and Controls.

Prior to Operation

1. Please fill out and send in the registration card.
2. Read and perform the following instructions while paying
close attention to all warnings and notices.
NOTICE Connect ONLY to water source capable of supplying a
minimum of 3 gpm (11.4 l) and no less than 20 psi (1.38 bars)
at the electric pressure washer end of garden hose. Inspect all
equipment, hoses and accessories thoroughly before each use;
DO NOT use if damaged.
• ONLY use branded accessories intended for use with this
product.
• For optimum performance, DO NOT use a garden hose that
exceeds 50 feet in length.
• Replace only with original equipment parts.
• To order, call (800) 743-4115 or visit
BRIGGSandSTRATTON.COM.
7