Installation - Endress+Hauser RIA 550 Manual De Utilización

Process display
22

3. Installation

Cut out and installation dimensions
1. Prepare the cut out:
Size 138 +1.0 mm x 33 +0.6 mm
- Installation depth 230 mm without terminal strip, 245
with terminal strip
- Bezel over size 9.0 mm
2. Push the unit through the front of the panel cut out
36 mm
9 mm
100
90
80
70
60
50
40
30
20
10
0
- + E
3. Hold the unit horizontally and fix the jackscrews into
their respective slots (top and bottom)
4. Tighten the jackscrews evenly using a screwdriver.
Hint:
Further support is only required if the panel material is
very thin. In order to avoid the unit being operated in
too high or low temperature please make sure that
there is sufficient ventilation.
230 mm without terminals
245 mm with terminals
0 10 20 30 40 50 60 70 80
144 mm
Installation
+
-
90 100
E