Attaching The Plasma Display - Pioneer PDK-WM03 Manual De Instrucciones

3. Attaching the Plasma Display

After attaching the display fittings to the plasma display, attach the plasma display to the wall mounting unit.
1 Place the plasma display on a cushion or other cushioning material that has been placed on a level floor,
then change the orientation as illustrated in the diagram.
Eye bolt
※ Use the bracket that is attached to the 61-inch plasma display as a handle.
Be sure to use gloves while doing this work as a precaution against possible injury.
※ When installing the plasma display in a high position to which it cannot be lifted by hand,
it can be suspended from the eye bolts at the tops of the display fittings and lifted with a
crane or other heavy machine. Check that the eye bolts are tight before doing this.
Stand holes
Handle portion
Bracket
Stand holes
E-7
Vertical Installation
UP
Front