Chapter 2 Repair Operations; Chapter 3 Controls - EMAK TN 3500 Manual Uso Y Mantenimento

CHAPTER 2 – REPAIR
OPERATIONS
After repair
Contact your closest dealer if
the machine is not working
properly and you are unable to
repair it by yourself.
This is the information you
have to give:
o Model and machine serial number (A).
o Engine serial number (B) in case of engine problems
o Circumstances leading to the problems (at what speed you were
using the machine, what type of work, etc)
o For how long you used the machine before problem occurred
o Other circumstantial details (where possible).

CHAPTER 3 CONTROLS

1. Unlock lever of left axle shaft
Press lever downwards to turn left.
2. Speed lever
Use for positions F1, F2, F3 or R.
3. Left side brake lever
Pull lever upwards to turn left.
4. "Dead man" clutch lever
Use this lever to engage or disengage the drive clutch and to en-
gage the parking brake
The crawlers rotate when the lever is pulled towards the handle
bar whilst engine is running.
When lever is released, the clutch is disengaged and brakes
turned on
5. Unlock lever of right axle shaft
Press lever downwards to turn right.
16