Chapter 2 Repair Operations - EMAK TN4500 Uso Y Mantenimiento

cHAPtEr 2
rEPAIr oPErAtIonS
After repair
Contact your closest dealer if the
machine is not working properly
and you are unable to repair it by
yourself.
This is the information you have
to give:
• Model and machine serial number
(A).
• Engine serial number (B) in case
of engine problems
• Circumstances leading to the
problems (at what speed you were
cHAPtEr 3 tEStInG
1) "Free fall" clutch lever
Use this lever to engage or disengage the drive clutch and engage
the parking brake.
The belts turn if the lever is pulled towards the handlebar pipe
whilst the motor is running.
When the lever is released, the clutch enters its disengaged
position and the brakes engage.
2) Gear lever
Use this for positions F1, F2, F3 or R (3+1),
F1-F2, F3-F4, or R1-R2 (4+2) .
3) Left side brake lever
Pull the lever upwards to turn left.
4) Slow-Fast gear lever (models 4+2 )
using the machine, what type of
work, etc)
• For how long you used the ma-
chine before problem occurred
• Other circumstantial details (where
possible).
16