How To Load - EMAK TN 3500 Manual Uso Y Mantenimento

How to park
CAUTION
o Choose a stable and flat sur-
face when parking the machine.
If you have to park downhill,
make sure you use some blocking
bars on the crawlers so that these
do not move.

5. How to load

CAUTION
o Do not carry anybody as trans-
port inside the box and do not
drive while sitting or standing on
the machine.
How to open and close the box's
sideboards
The box can be opened to load and
unload accordingly.
WARNING
o Make sure you tighten the
tube's fixing screws once you've
opened or closed the board. It the
latter should fall over whilst the
machine is on the go, it could get
damaged or cause you personal
injury.
1. To slide the board inner wards or
outwards, first loosen screws from
tubes (A) which are positioned in 6
points: one on the right and one on
the left below the side boards, two
on the left and two on the right be-
low and behind the front boards.
2. Push the board towards the
wanted position.
3. Tighten the screws back on to the
tubes.
How to use the box for transport
DANGER
o Do not crawl below the trans-
port box when it is raised up.
WARNING
o Always block the box with its
locking device otherwise it could
rise up when the machine is on the
go and fall over and cause the ma-
chine to turnover.
22