Hilti SC 60W-A36 Manual Del Usuario página 16

▶ When working with the power tool, always guide it away from your body.
▶ Never work overhead with the product.
▶ Do not attempt to brake the product by applying lateral pressure to the
saw blade.
▶ Do not touch the clamping flange or the clamping screw while the power
tool is running.
▶ The line of cut must be free of obstructions. Do not saw into screws, nails
etc.
▶ Never press the drive spindle lock button while the saw blade is rotating.
▶ The power tool is not intended for use by debilitated persons who have
received no special training. Keep the power tool out of reach of children.
▶ Do not point the power tool toward persons.
▶ Adapt the forward pressure applied to the saw blade and the material
being cut so that the blade does not stall. A stalled saw blade can cause
kickback.
▶ Avoid overheating the tips of the saw blade teeth.
▶ When cutting plastic, avoid melting the plastic.
▶ Dust from materials such as lead-based paint, certain types of wood and
concrete, masonry and stone containing quartz, minerals and metal can
be harmful to health. Contact with or inhalation of the dust can cause
allergic reactions and/or respiratory or other diseases among operators or
bystanders. Certain kinds of dust such as oakwood and beechwood dust
are classified as carcinogenic, especially in conjunction with additives
for wood conditioning (chromate, wood preservative). Only specialists
are permitted to handle material containing asbestos. If necessary, wear
a respirator appropriate for the type of dust generated. Ensure that
the workplace is well ventilated. Comply with national regulations
applicable to the materials you will be working with.
▶ Always engage the transport safety lock before storing or transporting the
saw.
▶ Never carry the power tool with your finger on the on/off switch.
▶ Remove the battery from the power tool before breaks, before mainte-
nance, before changing accessory tools and before transportation.
▶ Flying fragments can injure the body and eyes. Wear your personal
protective equipment and always wear protective glasses and protective
gloves.
▶ Use light respiratory protection when using the power tool without a dust
removal system for work that creates dust.
▶ Always set the cutting depth to approx. 2 mm (0.08 inch) more than the
thickness of the material to be cut.
▶ When working with the power tool, hold it securely with both hands.
Electrical safety
▶ Before beginning work, check the working area (e.g. using a metal
detector) to ensure that no concealed electric cables or gas and
8 English
Printed: 04.06.2018 | Doc-Nr: PUB / 5389747 / 000 / 01
2172267
*2172267*