Types Of Work; Switching The Tool On - Hilti SC 60W-A36 Manual Del Usuario

5.5 Setting the cutting angle
1. Release the cutting angle adjustment clamping lever.
2. Set the cutting angle with the aid of the cutting angle scale.
3. Tighten the cutting angle adjustment clamping lever.
5.6 Inserting the battery
WARNING
Risk of injury Inadvertent starting of the circular saw.
▶ Before fitting the battery, check that the circular saw is switched off and
that the transport safety lock is not engaged.
WARNING
Electrical hazard! Risk of short circuiting.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts on the circular saw are free from foreign objects.
WARNING
Risk of injury! Hazard presented by a falling battery.
▶ A falling battery may present a risk of injury to yourself and others. Check
that the battery is securely seated in the circular saw.
1. Press the battery compartment release button.
◁ The battery compartment cover opens.
2. Push the battery into the tool from the rear until it is heard to engage.
3. Push the battery compartment cover into the closed position until it is
heard to engage with a click.
6

Types of work

Check all safety devices before using the saw.
Open the pivoting guard fully and check that the guard automatically
returns to the fully closed position when released. Clean the pivoting
guard if necessary or have the product repaired by Hilti Service.
Observe the safety instructions and warnings in this documentation and on
the product.

6.1 Switching the tool on

1. Disengage the transport safety lock.
2. Press the on/off switch.
6.2 Sawing along a line
1. Secure the workpiece to prevent movement.
2. Position the workpiece so that the saw blade is free to rotate beneath it.
2172267
*2172267*
Printed: 04.06.2018 | Doc-Nr: PUB / 5389747 / 000 / 01
6
7
8
English 13