Items Supplied; Li­ion Battery Display - Hilti SC 60W-A36 Manual Del Usuario

3.3 Possible misuse
Do not use the saw to cut materials containing quartz.
Use of saw blades not in compliance with the given specification (e.g.
diameter, speed of rotation, thickness) or use of cutting and grinding discs
or blades made from high-alloy steel (HSS steel) is not permissible.
3.4 Transport safety lock
The power tool is equipped with a transport safety lock designed to avoid
unintentional starting.
Disengage the transport safety lock before use of the power tool and re-
engage it after use.
• To engage the transport safety lock, slide the transport safety lock to the
rear until it engages .
• To disengage the transport safety lock, slide the transport safety lock
forward until it disengages .

3.5 Items supplied

Circular saw, hex key, operating instructions.
Other system products approved for use with this product can be
found at your local Hilti Store or online at: www.hilti.group | USA:
www.hilti.com
3.6 Li­ion battery display
The state of charge of the Li-ion battery and malfunctions of the power tool
are indicated by the display on the Li­ion battery. The state of charge of
the Li­ion battery is displayed after pressing one of the two battery release
buttons.
Status
4 battery LEDs light up.
3 battery LEDs light up.
2 battery LEDs light up.
1 battery LED lights up.
1 battery LED flashes, the power
tool is in working order.
Battery state of charge cannot be displayed while the on/off switch is
pressed and for up to 5 seconds after releasing the on/off switch.
If the battery display LEDs blink, please observe the instructions given
in the Troubleshooting section.
10 English
Printed: 04.06.2018 | Doc-Nr: PUB / 5389747 / 000 / 01
Meaning
• State of charge: 75 % to 100 %
• State of charge: 50 % to 75 %
• State of charge: 25 % to 50 %
• State of charge: 10 % to 25 %
• State of charge: < 10 %
2172267
*2172267*