water pipes are present. External metal parts on the power tool can
become live, for example if you inadvertently damage electric wiring. This
presents a serious risk of electric shock.
2.4 Battery use and care
▶ Observe the special regulations and instructions applicable to the trans-
port, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the
product in a non-flammable location, well away from flammable materials,
where it can be kept under observation and allowed to cool down. In this
case, always contact your Hilti Service.
3
Description
3.1 Product overview
Auxiliary grip
@
Cutting depth scale
;
Transport safety lock
=
On/off switch
%
Battery compartment release
&
button
Hex key
(
Clamping lever for cutting
)
depth adjustment
Pivoting guard operating lever
+
Pivoting guard
§
Arbor
/
Base plate
:
0° cutting line indicator
∙
45° cutting line indicator
$
3.2 Intended use
The product described is a cordless circular saw. It is designed for sawing
wood or wood-like materials, plastics, drywall panel and gypsum fiber board.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only Hilti battery chargers from the C4/36 series for these batteries.
2172267
*2172267*
Printed: 04.06.2018 | Doc-Nr: PUB / 5389747 / 000 / 01
1
£
|
¡
Q
W
E
R
T
Z
U
I
O
Work-area light
Direction-of-rotation arrow
Mounting flange
Clamping flange
Clamping screw
Grip
Charge-status and fault indi-
cator
Release buttons (also used
to activate the charge status
indicator)
Battery
Spindle lock button
Cutting angle scale
Clamping lever for cutting
angle adjustment
English
9