Product Components; Mechanical Installation - Hach BL9000 Manual Del Usuario

Product components

Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
Figure 2 Product components
1 Mounting bracket
2 Mounting screws (4x)
Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.

Mechanical installation

Installation guidelines
Fire hazard. This product is not designed for use with flammable liquids.
• Do not install the instrument in a location that receives direct exposure to sunlight, rain or next to a
heat source.
• Install the instrument in an environmental enclosure or protective cover when installed outdoors.
• This product is not designed for use in a pressurized system. Install the product in an open
channel.
Mounting
Install the bubbler near the flow channel and the control instrument. Make sure that the air inlet ports
point down. Refer to Figure
6 English
C A U T I O N
C A U T I O N
3, Figure 4 and Figure
Figure 2. If any items are missing or
3 Bubbler
5.