Install The Bubbler Line - Hach BL9000 Manual Del Usuario

Figure 5 Mounting options
2
1 Vertical pipe mount
2 Horizontal pipe mount
Plumbing

Install the bubbler line

The bubbler line connects the bubbler to the flow channel. The installation procedure in the flow
channel is different for different types of flow channels.
The location of the bubbler line can have a large effect on the flow measurement accuracy. Most
primary devices have a bubbler line connector for installation of the bubbler line. Refer to the
instructions supplied by the primary device manufacturer for the correct installation location.
2
Use the pipe mounting kit for pipe installations. Refer to
8 English
2
3 Wall mount
4 Unistrut mount
Replacement parts on page 17.