Supplemental Oxygen; Accessories/Replacement Items - DeVilbiss Healthcare SleepCube AutoAdjust CPAP DV54 Serie Guía De Instrucciones

Dispositivo de presión positiva en las vías respiratorias
Ocultar thumbs Ver también para SleepCube AutoAdjust CPAP DV54 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
EN
NOTE
– The heater for the SleepCube's humidification system will not operate directly from a 12V DC power source. If you need humidification, passover humidification is still
available. Alternately, instead of connecting12V DC power directly to the SleepCube, you can pass the DC power through an inverter that will deliver AC power to the
system. This will allow the heater to function. The power rating of the inverter must be at least 200 watts @ 110V~ / 400 watts @ 220V~.
NOTE
– The SleepCube will automatically switch power sources between AC and 12V DC if both sources are available. If your unit is connected to both AC and 12V DC
power sources, it will operate on AC power as long as AC power is present, and automatically switch to 12V DC power if AC power is lost. When AC power is
restored, it will return to the AC source. You do not need to reset or adjust any settings when the power source switches, but remember that your heater will not
operate on 12V DC.

sUPPlemenTal oXyGen

Supplemental oxygen is sometimes prescribed in addition to CPAP for treatment of Obstructive Sleep Apnea. If your physician prescribed oxygen
for your sleep therapy, you can add the oxygen in one of two ways:
1.
Obtain the optional oxygen adapter (part #7353D-601) from your home care provider and connect it to the outlet port on the SleepCube.
Connect one end of the air supply tubing to the open end of the adapter and the other end of the air supply tubing to the mask.
2.
If your mask is equipped with an oxygen port, your physician may request that you apply oxygen directly to your mask.
WARNING-OxYGEN uSE
Oxygen supports combustion. To avoid possible physical injury, do not smoke while using this device with supplemental
oxygen. Do not use this device near hot objects, volatile substances or sources of open flames.
Always turn on the SleepCube before turning on the oxygen source. Turn the oxygen source off before turning off the
SleepCube.
This device is not suitable for use in the presence of a flammable anesthetic mixture with air or oxygen, or nitrous
oxide.
At a fixed flow rate of supplemental oxygen, the inhaled oxygen concentration will vary depending on the pressure
setting, patient breathing pattern, mask selection, and leak rate. This warning applies to most types of CPAP devices.
Never allow the oxygen source to run continuously while connected to the SleepCube if the device is not in use. If the
SleepCube is not being used, turn off the oxygen flow.
CAuTION– Oxygen is a prescription gas and should only be administered under the supervision of a physician.
CAuTION–The flow setting of the oxygen source must be specified by a physician.

aCCessoRies/RePlaCemenT iTems

Replacement Items
Air-inlet filter (4/pk) ....................................................................................................................................................................................... DV51D-602
Optional fine particle filter (4/pk) .................................................................................................................................................................. DV51D-603
Air supply tubing (6') ....................................................................................................................................................................................... 7351D-616
Air supply plug ............................................................................................................................................................................................... DV51D-604
Heater connection cover .............................................................................................................................................................................. DV51D-605
Oxygen adapter ............................................................................................................................................................................................... 7353D-601
Carrying case ................................................................................................................................................................................................. DV51D-610
Power Items
AC power cords
USA ........................................................................................................................................................................................................ DV51D-606
Europe, except U.K. ............................................................................................................................................................................. DV51D-607
U.K. ....................................................................................................................................................................................................... DV51D-608
Australia ................................................................................................................................................................................................. DV51D-609
SE-DV54
12
SupplEmEntal oxygEn/
accESSoriES/rEplacEmEnt itEmS

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido