DACOR_RF8000MC_DA68-03563J-00_EN.indd 49
NOTE
• If the front side (specifically marked
area) of the water tank has too much
moisture, the water tank may not fully
fill. Remove the moisture, and then try
again.
• Auto Water Fill will stop supplying
water for the water tank if the water
tank does not fill after a certain amount
of time. If this happens, check if the
water line is properly connected.
Remove and reinsert the water tank,
and then try again.
• Wipe around the infuser holder if the
infuser overflows or leaks.
• Water drops off if the rubber cap is
opened.
• The Auto Water Fill indicator blinks if
there is a leak. In case of a leak, open
the rubber cap so that the leaked water
drains. The indicator will then turn off.
However, if the indicator continues to
blink, there might be a system failure.
Contact your local Dacor Customer
Service.
• The Auto Water Fill indicators blink if
there is a leak. See page 39 for more
information.
English 49
2017-03-09
11:32:34