Grounding And Ac Power Cord Connections; Tools Needed - Schumacher Electric PWI70300A Manual Del Usuario

7.

GROUNDING AND AC POWER CORD CONNECTIONS

WARNING
7.1 This battery charger is for use on a nominal 230V, 50 Hz circuit. (See the warning
label on the charger for the correct input voltage.) The plug must be plugged into
an outlet that is properly installed and grounded in accordance with all local codes
ungrounded system.
DANGER
7.2
result in a risk of an electric shock or electrocution.
7.3 Recommended minimum AWG size for extension cord:
100 feet (30.5 meters) long or less – use a 10 gauge (6 mm
Over 100 feet (30.5 meters) long – use an 8 gauge (10 mm
8. FEATURES
2
1
9. ASSEMBLY INSTRUCTIONS
It is important to fully assemble your charger before use. Follow these instructions
for assembly.
Item
1 (2) axle brackets
2 (1) axle with pin holes
3 (2) wheels
4 (2) 10-32, thread cutting screws
5 (2) ¼-20, thread cutting screws
6 (1) foot
7 (2) axle caps
8 (2) hairpin cotter
9 (4) 8-18 sheet metal screws
10 (1) handle
11
12 (1) foam handle grip
RISK OF ELECTRIC SHOCK OR FIRE.
5
PARTS
3
4
1. Ammeter
2. Voltmeter
3. Foam Grip
4. Fiberglass Clamp Rod
5. Battery Clamps
6
6. Charge Rate Selector Switch
7 7. Timer
8. Wheel
8
3/8" wrench (for mounting foot)
5/16" wrench (for mounting wheels)
1/4" wrench (for mounting handle)
hammer
screwdriver (Phillips)
5
) extension cord.
2
) extension cord.
2

TOOLS NEEDED