Rain Bird IQ Satellite Guía De Instalación Y Usuario página 13

3 Insert the DTC-LXM cartridge in the
communications cartridge bay, bottom edge first.
4 Connect the communication cartridge ribbon
cable to the knife-edge connector located at the
top-left of the communications cartridge bay.
CAUTION! This connector can only go in
one way. Ensure that the RED edge of the
ribbon cable is toward the LEFT side of the
opening.
NOTE: Before snapping the cartridge into
place, you must position the wires so that
they match up with the cable routing
channel in the front panel.
5
Swing the top of the cartridge toward the front
panel and push into place, ensuring that the
thumb latch snaps securely into place.
IQ LXM-DTC Satellite Controller
4
3
5
11