Setting The Baud Rate; Dtc-Lxm Properties - Rain Bird IQ Satellite Guía De Instalación Y Usuario

Setting the Baud Rate

1 On the RS232 Rate screen, press either
change the baud rate to one of the available values:
2400, 4800, 9600, 19200, and 38400 baud.
2 Press Back to return to the Communication
Properties screen.

DTC-LXM Properties

Choose this option to view the Firmware Version and
Serial Number of the installed DTC-LXM Cartridge.
NOTE: The values displayed on this screen
are "read only". You cannot make changes
using this screen.
1
On the Config screen, press 3 for DTC-LXM
Properties. The Firmware (FW) Version and Serial
Number of the DTC-LXM cartridge are displayed.
2
Press Back to return to the Communications
Config screen.
IQ LXM-DTC Satellite Controller
or to
1
1
Communications
RS232 Rate
2400
+ - Back
Communications
Config
1 Comm Choice
2 Comm Properties
3 DTC Properties
1 2 3 Back
Communications
DTC Properties
FW Version: xx.xx
Serial#: aabbccddeeff
Back
2
2
27