Show Communications Errors - Rain Bird IQ Satellite Guía De Instalación Y Usuario

Show Communications Errors

1
On the Communications Menu, press 2 to display
the Diagnostics screen.
2 Press 1 to display the Communications Errors
screen.
3 Press 1 to clear all 4 counters (reset to 0).
NOTE: The counters are not saved in
memory and are reset to 0 every time DTC-
LXM power is cycled.
4
Press Back to return to the Diagnostics screen.
IQ LXM-DTC Satellite Controller
Communications
Device: <Device>
Status: Idle
1 Config
1
2 Diagnostics
1 2
Communications
Diagnostics
2
1 Show Comm Errors
2 Connect Baud Rate
3 Place Test Call
1 2
Communications
Comm Errors
#Pkts Sent: xxxxx
#Pkts Rec'd: xxxxx
#Rec'd Errors: xxxxx
#Sent Retries: xxxxx
3
1 Clear Counters
1
3 Back
4
Back
29