Rain Bird IQ Satellite Guía De Instalación Y Usuario página 27

2 Enter the Init String after the AT (at 3rd character):
Press / to cycle through 64 available characters,
including space, underscore, numbers 0 through 9,
letters A through Z, and others to enter the first
character.
Press Next to move to the right one character.
Press / to cycle through 64 available characters.
Repeat these steps until all characters are entered
or you reach the end of the first line. (Up to 40
characters may be entered on each line).
Press Next to wrap to the next line.
Continue entering characters using
until you complete the string.
Enter a blank space to indicate the end of the
string.
NOTE: The Init String ends when the first blank
space is encountered. If you press Back, or move
the LXM DTC dial to another position, the AT
string ends, and all characters after the first
blank space are erased.
IQ LXM-DTC Satellite Controller
2
/ / Next
Communications
Init String
ATxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxx
+ - Next Back
25