Heated Handles (592 Xpg); Electrical Carburetor Heating (592 Xpg); Maintenance; Maintenance Schedule - Husqvarna 585, 592 XP, 592 XPG Manuel Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Heated handles (592 XPG)

The product has heated front and rear handles. The
electrical heating coils are powered by a generator.
Push the switch in the direction of the arrow to engage
the function. Push the switch in the opposite direction to
disengage the function.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.

Maintenance schedule

Daily maintenance
Clean the external parts of the prod-
uct and make sure that there is no oil
on the handles.
Do a check of the throttle trigger and
throttle trigger lockout. Refer to
a check of the throttle trigger and
throttle trigger lockout on page 25 .
Make sure that there is no damage
on the vibration damping units.
Clean and do a check of the chain
brake. Refer to
To do a check of the
chain brake on page 25 .
Do a check of the chain catcher. Re-
To do a check of the chain
fer to
catcher on page 25 .
Turn the guide bar, do a check of the
lubrication hole and clean the groove
in the guide bar. Refer to
check of the guide bar on page 32 .
Make sure that the guide bar and
saw chain are getting sufficient oil.
1471 - 001 - 18.02.2021

Maintenance

Read and understand the
Weekly maintenance
Clean the cooling system. Refer to
To clean the cooling system on page
34 .
Do a check of the starter, starter rope
To do
and return spring.
Lubricate the needle bearing. Refer
To lubricate the needle bearing on
to
page 32 .
Remove burrs from the edges of the
guide bar. Refer to
the front hand guard and the chain
brake activation on page 24 .
Clean or replace the spark arrester
screen on the muffler.
Clean the carburetor area.
To do a
Clean or replace the air filter. Refer
to
To clean the air filter on page 28 .

Electrical carburetor heating (592 XPG)

Adjustment of the carburetor heating is done electrically
through a thermostat. This keeps the correct carburetor
temperature and prevents ice in the carburetor.
Monthly maintenance
Do a check of the brake band. Refer
To do a check of the brake band
to
on page 24 .
Do a check of the clutch centre,
clutch drum and clutch spring.
Clean the spark plug. Refer to
amine the spark plug on page 29 .
Clean the external parts of the carbu-
To do a check of
rettor.
Do a check of the fuel filter and the
fuel hose. Replace if necessary.
Do a check of all cables and connec-
tions.
Empty the fuel tank.
To ex-
23

Publicidad

Tabla de contenido
loading

Tabla de contenido