Fisher Scientific Isotemp 13-247-10 Manual Del Usuario página 8

S I
AFETY NFORMATION
8
• Do not continue to use the incubator if the tem-
perature controller fails, as evidenced by the red
ALARM indicator lighting.
• Use appropriate hand and eye protection when
handling hazardous chemicals.
• Rotisserie and shaker accessory may pose
potential pinch hazard. Always turn rotisserie
motor off prior to handling rotisserie or shaker.
• The interior of the incubator and its contents can
reach temperatures that can cause burns. Avoid
contact. The unit can remain hot without visual
indication for some time after power is switched
off.
CAUTION! DOUBLE POLE NEUTRAL FUSING.
• The power entry module located on the rear of
the unit contains two fuses, one located in each
side of the AC line.
• To ensure stability of Dual Models (13-247-30,
-31, -32 and -33), secure unit to a wall using the
included wall bracket.
• Use caution when moving incubator. Note
weight of unit to be moved and obtain help if
necessary. Tilt incubator to allow grasping
under bottom of unit at the sides or back. Do
not lift by grasping under plastic bezel at front of
unit. Dual unit may require a third person to pre-
vent unit from tipping while being moved.