Alpine CDA-7990R Guía De Instalación Y Conexiones página 8

Connections with other equipments
Understanding the switch.
When upgrading the system, you may need to change the switch.
Ai-NET
• System Switch (Bottom of the unit)
When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ/
NORM EQ / DIV
DIV position. When no device is connected, leave the switch in the NORM position.
To change the switch, turn the power off and insert a pointed object vertically.
To change the switch, follow the procedure below.
1) Unplug the power cable.
2) Insert a pointed object vertically.
• External Amplifier and Changer Connection
System
Switch
NORM
Antenna Receptacle
Remote Control
Interface Connector
Front Output
RCA Connectors
Rear Output
RCA Connectors
Subwoofer
RCA Connectors
< DC-DC Converter >
Ai-NET Cable
(Included with CD Changer)
NOTES
• Do not install the DC-DC converter where it will be exposed to moisture such as under the floor mat or near the air
conditioner. This may cause a malfunction.
• Do not bundle the DC-DC converter cable with the audio cables. Noise may be induced into your system.
• Keep the DC-DC converter away from the Antenna cables and the rear side of the unit, otherwise noise may be
generated when receiving radio broadcast.
• The DC-DC converter temperature can become hot. This is not a malfunction.
• For details on turning the Subwoofer ON or OFF, see "Subwoofer On and Off" (Page 17) of the Owner's Manual.
8
-EN
All manuals and user guides at all-guides.com
ISO Antenna
Convertor Plug
To remote control interface box
(L)
(R)
(L)
(R)
(L)
(R)
AUDIO
INTERRUPT IN
Pink/Black
REMOTE
TURN-ON
Blue/White
POWER ANT
Blue
ILLUMINATION
Orange
GND
Black
IGNITION
Red
BATTERY
Yellow
Choke Coil Fuse (5A)
GND
Black
BATTERY
Yellow
Fuse (5A)
Ai-NET CD Changer
(Sold Separately)
3) Change to the specified position.
4) Connect the power cable.
Antenna
ISO Antenna Plug
Front Amplifier (Sold separately)
RCA Extension Cable
(Sold Separately)
Input
Rear Amplifier (Sold separately)
RCA Extension Cable
(Sold Separately)
Input
Subwoofer Amplifier (Sold separately)
RCA Extension Cable
(Sold Separately)
Input
To vehicle phone
To power antenna
To the instrument cluster
illumination lead
Connect to a metal part of chassis body with a screw.
Ignition Key
Connect to a metal part of
chassis body with a screw.
(L)
Front Speaker
(R)
Remote Turn-ON Lead
(L)
Rear Speaker
(R)
Blue/
White
Remote Turn-ON Lead
(L)
Subwoofer Speaker
(R)
Blue/
White
Remote Turn-ON Lead
Blue/
White
Battery