Remote Control (Optional); Type And Replacement Of Batteries; Commissioning Settings; Adjusting Time, Day, Month And Year - Dal Zotto STEFY Manual Usuario

reMOte cOntrOL (OptiOnAL)

The heating power, the desired room temperature and the
appliance ignition/switch off, can be adjusted using the
remote control.
To ignite the stove, press key 1 for a few seconds; the
appliance will automatically enter the ignition phase. It is
possible to adjust power by using keys 4 and 5, whereas the
wanted temperature can be adjusted using keys 2 and 3. To
switch the stove off, keep key 1 pressed for a few seconds.
4
5
type AnD repLAceMent
OF BAtterieS
The batteries are housed in the
lower part of the remote control.
To replace them, remove
the battery holder (as indicated
in the figure at the back of the
remote control), remove or
insert the battery according to the
symbol on the remote control and
on the battery itself.
For operation, 1 Cr2025, 3V lithium buffer battery is
required.
If the remote control is off because it has no
batteries, stove can be controlled from the
control panel on top of it.
While replacing the battery, pay attention to the
polarity by observing the symbol on the inside
compartment of the remote control.
X 3
The batteries used contain metals harmful
for the environment. They must therefore
be disposed of separately in appropriate
containers.
48
1
3
2

cOMMiSSiOning SettingS

once the power cable at the back of the stove has been
connected, move the switch, also located on the back, to (I).
The switch at the back of the stove powers the stove board.
The stove remains off and a first screen appears on the panel
reading oFF.

ADjuSting tiMe, DAy, MOntH AnD yeAr

CoNTroLS ProCEDUrE
Press key 5 for a few seconds, until the text SET CLoCk
Š
appears.
Confirm using key 5.
Š
Use key 3 to assign the day.
Š
Press key 5.
Š
Use the same procedure (5 to move forward 3 to set) to
Š
adjust the hours, minutes, day, month and year.
Press key 1 several times to confirm and exit the Menu.
Š
Set cLOck
DaY
HoUrS
MINUTES
DaTE
MoNTH
YEar

ADjuSting LAnguAge

CoNTroLS ProCEDUrE
Press key 5 for a few seconds, until the text SET CLoCk
Š
appears.
Press key 3 twice until set Language.
Š
Š Confirm using key 5.
Select the language using key 3.
Š
Press key 1 several times to confirm and exit the Menu.
Š
LaNgUagE
engLiSH
MoN, TUE, WED, ...SUN
0...23
00...59
1...31
1...12
00...99
ITaLIaN
ENgLISH
gErMaN
FrENCH
SPaNISH