Safety Warnings - Megger DM80/2 Serie Guia Del Usuario

• Safety Warnings and Precautions must be read and understood before
the instrument is used. They must be observed during use.
• The circuit under test must be de-energized and isolated before
connections are made except for voltage measurement.
• Circuit connections must not be touched during a test.
• After insulation tests, capacitive circuits must be allowed to discharge
before disconnecting the test leads.
• The Live Circuit Warning and Automatic Discharge are additional safety
features and should not be regarded as a substitute for normal safe
working practice.
• Replacement fuses must be of the correct type and rating.
• Test leads, including crocodile clips, must be in good order, clean and
have no broken or cracked insulation.
• U.K. Safety Authorities recommend the use of fused test leads when
measuring voltage on high energy systems.
THIS INSTRUMENT MUST ONLY BE USED BY SUITABLY TRAINED AND COMPETENT PERSONS

SAFETY WARNINGS

NOTE
.
2