Notes - Megger DM80/2 Serie Guia Del Usuario

Notes

BEFORE USING THE INSTRUMENT, follow
the separate instructions provided to fit either
the locking or non-locking test button. Megger
Limited recommend the fitting of the non-
locking test button. Hands free operation is
provided on all ranges except the insulation
ranges. If the locking button is fitted, extra care
must be taken.
Users of this equipment and or their employers are reminded that Health and Safety Legislation require them
to carry out valid risk assessments of all electrical work so as to identify potential sources of electrical danger
and risk of electrical injury such as from inadvertent short circuits. Where the assessments show that the risk
is significant then the use of fused test leads constructed in accordance with the HSE guidance note GS38
'Electrical Test Equipment for use by Electricians' should be used.Users of this equipment and or their
employers are reminded that Health and Safety Legislation require them to carry out valid risk assessments
of all electrical work so as to identify potential sources of electrical danger and risk of electrical injury such as
from inadvertent short circuits. Where the assessments show that the risk is significant then the use of fused
test leads constructed in accordance with the HSE guidance note GS38 'Electrical Test Equipment for use by
Electricians' should be used.
3
Symbols used on the instrument:
Risk of electric shock.
Refer to User Guide.
Equipment protected throughout by
Double Insulation (Class II).
Equipment complies with current EU
Directives.
NOTE