Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

I
Use of rubber gloves is good safety practice even if the equipment is properly operated and
grounded.
I
Safety is the responsibility of the operator.
I
Use extreme caution when using the instrument around energised electrical equipment.
I
Do not attempt to use the ground tester to twist or pry the ground electrode or ground wire away
from the equipment being grounded.
I
All metal objects or wires connected to the electrical system should be assumed to be lethal until
tested, the grounding system is no exception.
I
Do not drop the ground tester, as damage to the clamp head may occur, producing incorrect
readings.
Symbols used on the instrument are:
F
Caution: Risk of Electric Shock
G
Caution: refer to accompanying notes
t
Equipment protected throughout by Double Insulation (Class II)
c
IEC 61010-2-032 CAT III 300V , CAT II 600V Pollution Degree 2
1
G

SAFETY WARNINGS

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Det20c

Tabla de contenido