Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Tank graphic and weight of refrigerant
•
Numerical value of refrigerant charged
•
Total weight of refrigerant to be charged
•
Tank pressure and temperature
•
Vehicle system pressure
•
End of Charge / Hose Clearing Process
Follow the instructions on the screen:
1.
Close the high and low side valves on the machine, press next to continue.
2.
Start the vehicle engine and turn AC system on high, press next to continue.
3.
Verify the high and low side system pressures. Press next to continue.
4.
Turn off the vehicle and allow the AC system pressures to equalize.
5.
Close and remove the high side coupler. Press next to continue.
6.
Start the vehicle, turn the AC system on high. Press next.
7.
Open the valves on the machine. Press next.
8.
Allow the AC system pressures to equalize. Press next
9.
Close and remove the low side coupler, turn off the vehicle. Press next.
10. Hose clearing will be displayed. The tank graphic with weight will be displayed. The tank pressure
and temperature will be displayed.
11. The machine will recover any residual refrigerant and ready itself for the next vehicle.
12. Process Completed will be displayed. This screen will be displayed when the recovery, vacuum,
leak check, oil inject (COMMANDER2000 (-E) only), vehicle charge and hose clearing has been
completed.
22
www.mastercool.com
Publicidad
Tabla de contenido
